προϊόν

Iatty Reloaded RTA - restricted RDA atomizer by Golden Greek atomizers and mods

A Greek guy on our Golden Greek Freaks Facebook Page told us that he loves his GG Iatty, claiming it's the tastiest and the thickest vapor atomizer he has ever tried. He is not alone in saying that. All people think alike for Iatty, that was made 9 years ago and that's why our team decided to produce it again, but in a modern way.



Iatty Reloaded RTA Features:

  • MTL vape with a pin at 1,5 mm hole that can be adjusted via the AD ring on the base to let less air go through. One more pin at 2mm for open MTL vape that can also be adjusted to let less air go through, via the air ring on the base.

  • Also, one more pin for tight MTL vape (without air hole), that forces air to go around it and NOT through it like in the other 2 pins. This pin works like a pin with 0,8mm hole.

  • Tight DTL with a pin at 3mm hole.

  • Iatty Reloaded carries iquid control by turning the body. At the first stopper the liquid is fully open. At the opposite stopper the body comes out of the base to check your resistance. In any other position, the liquid control is semi-opened or closed.

  • Iatty Reloaded carries air control feature via an AD ring on the base with several holes and two stoppers. At the first stopper the air holes are fully open and you can separate the AD ring from the base. At the opposite stopper the air holes are fully closed. In any other position, the air is semi-opened.


  • material: SS 316L.

  • plastic material between posts: PEEK.

  • 22mm in diameter.

  • 40,5mm length in short version with 2ml liquid capacity.

  • 49mm length in long version with 4ml liquid capacity (by adding an extension. without needing to empty the tank).


  • You can add supplementary extensions, depending on how liquid independent you want to be.

  • Top refilling as all Golden Greek devices via two very big refilling holes.



Iatty Reloaded RTA and restricted RDA atomizer TIPS AND TRICKS:


  • Close the liquid control of Iatty Reloaded before refill.

  • Wet the o-rings of Iatty Reloaded with the liquid to make them slippery, consequently easy to put in.

  • If you want to clean gurgling or change pins without tools on Iatty Reloaded: Please unscrew the base from the deck by keeping the whole body on one hand and the base on the other hand.

  • Turn the AD ring of Iatty Reloaded to the right and it will lock in the fully opened position. Being in this position, you can pull it off.

  • Turn the liquid control of Iatty Reloaded to the right and it will lock in the fully open position.

  • Turn the AD ring of Iatty Reloaded to the left and it will lock in the fully closed position.

  • Turn the liquid control of Iatty Reloaded to the left and separate the tank from the deck to check the resistance.

  • Turn the whole body of Iatty Reloaded to the left to semi-close or totally close the liquid control.

  • The blind pin that doesn't have a hole inside, forces the air to go around it and works like a 0,8mm pin for tight MTL.

  • The very short pin is for DTL vaping with a 3mm hole.

  • The metal part inside the spares' bag that looks like the ceramic is to replace ceramic.

  • In case you want to remove both the ceramic and SS it's alright, but you also need to remove the o-ring, as it will be too close to the resistance.

  • Screw the refilling cap of Iatty Reloaded as smoothly as possible, otherwise you may damage the o-rings. As a result you won't be able to unscrew it easily and also Iatty Reloaded may leak.

  • Put as many extensions as you like to increase liquid capacity.

  • If you use a thin wire (up to 0,5mm), turn each end of the wire around the half of diameter of each bolt. That way you avoid short circuits from extra wire, when you cut it with pliers.

  • Press, not too deeply, the wick inside the feeding holes of Iatty Reloaded. Don't push it deeply at the bottom of the holes.

  • Take off the o-ring on the deck if you want very good feeding at high volts

  • Τhe center post extension of Iatty Reloaded is polygonal at its end, so you can use a tool that fits on it when you want to unscrew it.

  • If you want a bit more air and you don't want to change the pin, adjust the center pin of Iatty Reloaded by unscrewing it a little.



Iatty Reloaded will be sold only via preorders. We will announce the preorders on our FB page

Preorders for Iatty Reloaded will stay open until the end of August. After that, we will start the bulk production and in about 3 months you will have it.


It is a Golden Greek atomizers and mods construction, vape it, you deserve it!



IATTY RELOADED PHOTO GALLERY


IATTY RELOADED VIDEO REVIEWS


IATTY RELOADED PARTS


stores to buy

5080 προβολές

Οι επαγγελματίες του ατμίσματος

     GOLDEN GREEK     ατμοποιητές - mods - υγρά αναπλ/σης

ηλεκτρονικά τσιγάρα από τον Imeo

GG atomizers and mods logo